Toyota Camry Manual page 1810

INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check wire harness (to B+).
Front Airbag
Sensor (LH)
ON
(+)
(–)
H01370
AB0119
H08065
OK
3 Check wire harness (to ground).
Front Airbag
Sensor (LH)
(+)
(–)
H01370
H08399
OK
DIAGNOSTICS
CHECK:
(a)
Airbag
(b)
Sensor
Assembly
Airbag Sensor
OK:
Assembly
SL+
SL–
H08066
CHECK:
For the connector (on the airbag sensor assembly side) be-
tween the front airbag sensor (LH) and the airbag sensor as-
Airbag
sembly, measure the resistance between body ground and
Sensor
Assembly
each of SL+ and SL–.
OK:
Airbag Sensor
Assembly
SL+
SL–
H08400
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to ON.
For the connector (on the airbag sensor assembly side)
between the front airbag sensor (LH) and the airbag sen-
sor assembly, measure the voltage between body ground
and each of SL+ and SL–.
Voltage: Below 1 V
NG Repair or replace harness or connector be-
tween front airbag sensor (LH) and airbag sen-
sor assembly.
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween front airbag sensor (LH) and airbag sen-
sor assembly.
Author :
DI–783
Date :
1018