Toyota Camry Manual page 2559

Throttle
Lever
No
Clearance
Disconnect
Vacuum
SFI (5S–FE) –
INSPECTION
1. CLEAN THROTTLE BODY
(a) Using a soft brush and carburetor cleaner, clean the cast
parts.
(b) Using compressed air, clean all the passages and aper-
tures.
NOTICE:
To prevent deterioration, do not clean the throttle position
sensor and throttle opener.
B00527
2. INSPECT THROTTLE BODY
Stop
Screw (a) Disconnect the throttle opener vacuum hose from the
throttle body.
(b) Apply vacuum to the throttle opener.
(c) Check that there is no clearance between the throttle stop
screw and throttle lever when the throttle valve is fully
closed.
(d) Reconnect the throttle opener vacuum hose to the throttle
body.
B01284
3. INSPECT THROTTLE POSITION SENSOR
(See page SF–29)
THROTTLE BODY
Author :
SF–33
SF0DQ–03
Date :
1466