Toyota Camry Manual page 1879

DI–852
INSPECTION PROCEDURE
1 Check CIG and ECU–IG fuses.
Instrument panel J/B:
ECU–IG Fuse
OK
2 Check voltage between terminal IG of theft deterrent ECU and body ground.
(–) (+)
OK
Check and replace theft deterrent ECU.
DIAGNOSTICS –
PREPARATION:
(a) Remove the fuse box opening cover.
(b) Remove ECU–IG fuses from instrument panel junction
block No.1.
CHECK:
Check continuity of ECU–IG fuses.
OK:
Continuity
I00269
NG
PREPARATION:
(a) Disconnect the theft deterrent ECU connectors.
(b) Turn ignition switch ON.
CHECK:
Measure voltage between terminal IG of theft deterrent ECU
connector and body ground.
OK:
Voltage: 10 – 14 V
IG
I01926
NG
THEFT DETERRENT SYSTEM
Check for short in all the harness and compo-
nents connected to the ECU–IG fuses (See at-
tached wiring diagram).
Check and repair harness and connector be-
tween theft deterrent ECU and battery
(See page IN–31).
Author : Date :
1087