MX–16
MANUAL TRANSAXLE (S51)
28.
REMOVE NO.5 SYNCHRONIZER RING WITH KEY
SPRING FROM NO.3 CLUTCH HUB
(a)
Remove the No.5 synchronizer ring with the key spring
from the No.3 clutch hub.
(b)
Using a screwdriver, remove the snap ring.
HINT:
Wrap vinyl tape on the screwdriver to prevent damaging the
synchronizer ring.
(c)
Remove the synchronizer rings.
MT0781
–
MANUAL TRANSAXLE ASSEMBLY
Author :
Date :
1866