Toyota Camry Manual page 2621

Rotate
Outward
Align
SFI (1MZ–FE) – INJECTOR
(g) Apply a light coat of spindle oil or gasoline on the place
where a intake manifold touches an O–ring of the injector.
(h) Place the delivery pipes and fuel pipe together with the 6
injectors in position on the intake manifold.
(i) Temporarily install the 4 bolts holding the delivery pipes
to the intake manifold.
(j) Temporarily install the bolt holding the No.1 fuel pipe to
the intake manifold.
B01021
(k) Check that the injectors rotate smoothly.
HINT:
If injectors do not rotate smoothly, the probable cause is incor-
rect installation of O–rings. Replace the O–rings.
(l) Position the injector connector outward.
S04728
(m) Tighten the 4 bolts holding the delivery pipes to the intake
manifold.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
(n) Tighten the bolt holding the No.1 fuel pipe to the intake
manifold.
Torque: 19.5 N·m (200 kgf·cm, 14 ft·lbf)
B01020
2. CONNECT NO.1 FUEL PIPE
(a) Align the alignment marks (white paint) on the No.1 fuel
pipe.
S06525
(b) Connect the No.1 fuel pipe (fuel tube connector) to the
fuel filter.
CAUTION:
Perform connecting operations of the fuel tube connector
(quick type) after observing the precaution.
(See page SF–1)
S05351
Author : Date :
SF–29
1528