Toyota Camry Manual page 2057

EM–58
California
New Insulator
New O–Ring
New Grommet
Except California
New Grommet
ENGINE MECHANICAL (5S–FE)
Adhesive
P13638
S05962
New O–Ring
New
O–Ring
Z09141
– CYLINDER HEAD
9. INSTALL OIL PRESSURE SWITCH
(a) Apply adhesive to 2 or 3 threads.
Adhesive:
Part No. 08833–00080, THREE BOND 1324 or equiva-
lent
(b) Install the oil pressure switch.
10. INSTALL ENGINE HANGERS AND GENERATOR
BRACKET
(a) Install the generator bracket and RH engine hanger as-
sembly with the 3 bolts.
Torque: 42 N·m (425 kgf·cm, 31 ft·lbf)
(b) Install the LH engine hanger with the bolt.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
11. INSTALL NO.3 TIMING BELT COVER
Install the timing belt cover with the 3 bolts.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
12. TEMPORARILY INSTALL NO.1 IDLER PULLEY AND
TENSION SPRING (See page EM–23)
13. INSTALL CAMSHAFT TIMING PULLEY
(See page EM–23)
14. CONNECT TIMING BELT TO CAMSHAFT TIMING
PULLEY (See page EM–23)
15. INSTALL INJECTORS AND DELIVERY PIPE
(a) California:
Install a new insulator and grommet to each injector.
(b) Except California:
Install a new grommet to each injector.
(c) California:
Apply a light coat of gasoline onto 2 new O–rings, and
install them to each injector.
(d) Except California:
Apply a light coat of gasoline onto a new O–ring, and
install it to each injector.
Author : Date :
1230