Toyota Camry Manual page 1849

DI–822
INSPECTION PROCEDURE
1 Check operation of open door warning light.
CHECK:
Check that open door warning light comes ON when each door is opened, and goes OFF when all doors
are closed.
OK
2 Check voltage between terminal CTY of wireless door lock ECU connector and
body ground.
NG
Check and repair harness and connector between wireless door lock ECU and door courtesy
switch.
DIAGNOSTICS
CTY(+)
N14695
– WIRELESS DOOR LOCK CONTROL SYSTEM
NG Check open door warning light circuit
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
el brace.
CHECK:
Measure voltage between terminal CTY of wireless door lock
ECU connector and body ground, when all doors are closed.
OK:
Voltage: 10 – 14 V
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author : Date :
1057