Toyota Camry Manual page 2004

2 2
Upward
Cam Lobe
Spark Plug Side
SST (A)
SST (B)
Magnetic
Finger
ENGINE MECHANICAL (5S–FE)
(c)
3 3 4 4
4 4
P03442
4.
(a)
Notch
P13927
HINT:
Apply SST (B) at slight angle on the side marked with "9", at the
position shown in the illustration.
Spark Plug Side
P13988
P13926
(b)
EM0494
– VALVE CLEARANCE
Check only the valves indicated as shown. Measure the
valve clearance. (See step (a))
ADJUST VALVE CLEARANCE
Remove the adjusting shim.
(1) Turn the crankshaft so that the cam lobe of the cam-
shaft on the adjusting valve points upward.
(2) Position the notch of the valve lifter facing the spark
plug side.
(3) Using SST (A), press down the valve lifter and place
SST (B) between the camshaft and valve lifter. Re-
move SST (A).
SST 09248–55040 (09248–05410, 09248–05420)
(4) Remove the adjusting shim with a small screwdriver
and magnetic finger.
Determine the replacement adjusting shim size by follow-
ing the Formula or Charts:
(1) Using a micrometer, measure the thickness of the
removed shim.
(2) Calculate the thickness of a new shim so that the
valve clearance comes within specified value.
T ........... Thickness of removed shim
A ........... Measured valve clearance
N ........... Thickness of new shim
Intake: N = T + (A – 0.24 mm (0.009 in.))
Author :
EM–5
Date :
1177