Toyota Camry Manual page 1676

DTC B0102/11
CIRCUIT DESCRIPTION
The D squib circuit consists of the airbag sensor assembly, spiral cable and steering wheel pad.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0102/11 is recorded when a ground short is detected in the D squib circuit.
DTC No.
D Short circuit in D squib wire harness (to ground)
D D squib malfunction
B0102/11
D Spiral cable malfunction
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–640.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check D squib circuit.
Spiral
Cable
D Squib
H01001
R14301
OK
DIAGNOSTICS
Short in D Squib Circuit (to Ground)
DTC Detecting Condition
CHECK:
For the connector (on the spiral cable side) between the spiral
cable and the steering wheel pad, measure the resistance be-
Airbag
tween D+ and body ground.
Sensor
Assembly
OK:
D+
NG
H01126
– SUPPLEMENTAL RESTRAINT SYSTEM
D Steering wheel pad (D squib)
D Spiral cable
D Airbag sensor assembly
D Wire harness
Resistance: 1 MΩ or Higher
Go to step 5.
Author :
DI–649
Trouble Area
Date :
DI4L2–01
884