Toyota Camry Manual page 2373

C
C
A
C
B
14 mm Head B
14 mm Head A
MANUAL TRANSAXLE (E153)
21.
(a)
(b)
Q09994
22.
23.
24.
Remove the 2 bolts.
Q09995
25.
A
(a)
(b)
C
A A
B
Q09996
26.
Using a transmission jack, support the transaxle.
27.
14 mm Head B
(a)
(b)
Q09997
– MANUAL TRANSAXLE UNIT
REMOVE LH ENGINE MOUNTING INSULATOR WITH
BRACKET
Remove the 2 hole plugs, nuts and 3 bolts.
Torque:
Bolt: 64 N·m (650 kgf·cm, 47 ft·lbf)
Nut: 80 N·m (820 kgf·cm, 59 ft·lbf)
Lift up the transaxle and remove the left engine mounting
insulator with the bracket.
REMOVE HOLE PLUG AND 4 ENGINE REAR SIDE
MOUNTING NUTS
Torque: 66 N·m (670 kgf·cm, 48 ft·lbf)
ATTACH ENGINE SLING DEVICE TO ENGINE HANG-
ER
(See page EM–69)
DISCONNECT STEERING RETURN PIPE FROM
FRONT SUSPENSION MEMBER
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
REMOVE FRONT SUSPENSION MEMBER WITH LOW-
ER SUSPENSION ARM
Remove the LH and RH fender liner set screws.
Remove the 6 bolts, 4 nuts, front LH and RH suspension
member braces, rear LH and RH suspension member
braces and front suspension member with the lower sus-
pension arm.
Torque:
Bolt A: 181 N·m (1,850 kgf·cm, 134 ft·lbf)
Bolt B: 32 N·m (330 kgf·cm, 24 ft·lbf)
Nut C: 36 N·m (370 kgf·cm, 27 ft·lbf)
JACK UP TRANSAXLE SLIGHTLY
REMOVE FLYWHEEL HOUSING UNDER COVER AND
TRANSAXLE LOWER SIDE MOUNTING BOLT
Remove the 2 bolts and cover.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
Remove the 3 bolts of the transaxle lower side.
Torque:
14 mm head A: 46 N·m (470 kgf·cm, 34 ft·lbf)
14 mm head B: 37 N·m (380 kgf·cm, 27 ft·lbf)
Author :
MX–7
Date :
1808