Toyota Camry Manual page 2384

MX–18
MANUAL TRANSAXLE (E153)
32.
(a)
(b)
33.
(a)
(b)
34.
35.
(a)
(b)
36.
(a)
(b)
HINT:
Wrap vinyl tape on the screwdriver to prevent damaging the
synchronizer ring.
(c)
MT0781
– MANUAL TRANSAXLE ASSEMBLY
REMOVE INPUT AND OUTPUT SHAFTS ASSEMBLY
Leaning the output shaft to the differential side, remove
the input shaft assembly.
Lift up the differential case assembly, remove the output
shaft assembly.
REMOVE DIFFERENTIAL CASE ASSEMBLY
Remove the oil pump drive gear.
Remove the differential case assembly.
REMOVE MAGNET FROM TRANSAXLE CASE
REMOVE TRANSMISSION OIL PUMP ASSEMBLY
AND OIL PIPE
Remove the 2 bolts and oil pipe.
Torque: 17 N·m (175 kgf·cm, 13 ft·lbf)
Remove the 2 bolts and oil pump assembly.
Torque: 17 N·m (175 kgf·cm, 13 ft·lbf)
REMOVE NO.5 SYNCHRONIZER RING WITH KEY
SPRING FROM NO.3 CLUTCH HUB
Remove the No.5 synchronizer ring with the key spring
from the No.3 clutch hub.
Using a screwdriver, remove the snap ring.
Remove the synchronizer rings.
Author : Date :
1819