Toyota Camry Manual page 2134

10 mm
Hexagon
Wrench
ENGINE MECHANICAL (1MZ–FE)
INSTALLATION
1.
(a)
Inward
(b)
NOTICE:
Do not scratch the sensor part of the crankshaft timing
Sensor
pulley.
(c)
A05060
2.
Plate Washer
(a)
(b)
A01802
3.
(a)
(b)
A05055
4.
(a)
(b)
– TIMING BELT
INSTALL CRANKSHAFT TIMING PULLEY
Align the pulley set key with the key groove of the timing
pulley, and slide on the timing pulley.
Install the timing pulley, facing the sensor side inward.
Install the timing belt plate with the bolt.
Torque: 8 N·m (80 kgf·cm, 69 in.·lbf)
INSTALL NO.1 IDLER PULLEY
Adhesive: Part No. 08833–00080, THREE BOND 1344,
LOCTITE 242 or equivalent
Using a 10 mm hexagon wrench, install the plate washer
and idler pulley with the pivot bolt.
Torque: 34 N·m (350 kgf·cm, 25 ft·lbf)
Check that the pulley bracket moves smoothly.
INSTALL NO.2 IDLER PULLEY
Install the idler pulley with the bolt.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
Check that the idler pulley moves smoothly.
INSTALL RH CAMSHAFT TIMING PULLEY
Face the flange side of the timing pulley outward.
Align the knock pin on the camshaft with the knock pin
groove of the timing pulley, and slide on the timing pulley.
Author :
EM–21
EM0YO–01
Date :
1307