Toyota Camry Manual page 1747

DI–720
3 Check airbag sensor assembly.
Squib (LH)
SFL– SFL+
DLC1
E1 Tc
H02278
W03860
AB0118 AB0119
R13006 H01071
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
(c)
ACC ON
CHECK:
(a)
or
(b)
DTC B0117/45
(c)
(d)
(e)
H03269
OK:
HINT:
Codes other than code B0117/45 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect SFL+ and SFL– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (LH) and the airbag sensor assem-
bly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0117/45 is not output.
NG Replace airbag sensor assembly.
Author : Date :
955