Toyota Camry Manual page 2023

EM–24
Length = 660 mm (25.98 in.)
ENGINE MECHANICAL (5S–FE)
5.
NOTICE:
The engine should be cold.
(a)
S05574
(b)
(c)
HINT:
When re–using timing belt:
Align the points marked during removal, and install the belt with
S05944
the arrow pointing in the direction of engine revolution.
6.
Install the guide, facing the cup side outward.
S05578
7.
(a)
If the gasket has cracks or peeling, etc., replace it using these
steps:
P25230
– TIMING BELT
TEMPORARILY INSTALL TIMING BELT
Using the crankshaft pulley bolt, turn the crankshaft and
align the timing marks of the crankshaft timing pulley and
oil pump body.
Remove any oil or water on the crankshaft pulley, oil
pump pulley, water pump pulley, No.1 idler pulley and
No.2 idler pulley, and keep them clean.
Install the timing belt on the crankshaft timing pulley, oil
pump pulley, No.1 idler pulley, water pump pulley and
No.2 idler pulley.
INSTALL TIMING BELT GUIDE
INSTALL NO.1 TIMING BELT COVER
Check that the timing belt cover gasket has no cracks or
peeling, etc.
(1) Using a screwdriver and gasket scraper, remove all
the old gasket material.
(2) Thoroughly clean all components to remove all the
loose material.
(3) Remove the backing paper from a new gasket and
install the gasket evenly to the part of the timing belt
cover shaded black in the illustration.
(4) After installing the gasket, press down on it so that
the adhesive firmly sticks to the timing belt cover.
Author : Date :
1196