MANUAL TRANSAXLE (S51)
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
reassembly.
1.
Front
(a)
(b)
HINT:
Position the identification groove of the hub sleeve to the front
Q02949
of the transmission.
2.
(a)
SST
(b)
SM0199
(c)
Z00428
(d)
3.
Z00429
–
OUTPUT SHAFT
INSTALL NO.1 CLUTCH HUB INTO HUB SLEEVE
Install the 3 springs and shifting keys to the clutch hub.
Install the hub sleeve to the clutch hub.
INSTALL THRUST WASHER, 1ST GEAR, NEEDLE
ROLLER BEARING, SYNCHRONIZER RING AND NO.1
HUB SLEEVE TO OUTPUT SHAFT
Using SST and a press, install the thrust washer.
SST
09316–60011 (09316–00041)
Apply gear oil to the needle roller bearing.
Place the synchronizer ring on the gear and align the ring
slots with the shifting keys.
Using a press, install the 1st gear and No.1 hub sleeve.
INSPECT 1ST GEAR THRUST CLEARANCE
(See page MX–28)
Author :
MX–33
MX04Q–01
Date :
1883