Toyota Camry Manual page 1791

DI–764
9 Check airbag sensor assembly.
Side Airbag Sensor
Assembly (LH)
ACC
or
DLC1
E1 Tc
H01012
AB0118
AB0119
R13006 H01065
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
(c)
Assembly
(d)
ON
CHECK:
(a)
DTC B1140/32
(b)
(c)
(d)
(e)
H01164
OK:
HINT:
Codes other than code B1140/32 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Disconnect the side airbag sensor (RH) from the connec-
tor and connect the side airbag sensor (LH) to the con-
nector.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B1140/32 is not output.
NG Replace airbag sensor assembly.
Author : Date :
999