Toyota Camry Manual page 2019

EM–20
Turn
SST
ENGINE MECHANICAL (5S–FE)
Hold
A02590
S05612
S05591
S05944
S05614
– TIMING BELT
(2) After aligning the matchmark, hold the timing belt.
And turn the crankshaft pulley counterclockwise,
and align its groove with timing mark "0" of the No.1
timing belt cover.
(b) Remove the pulley bolt.
(c) Using SST, remove the pulley.
SST 09950–50012 (09951–05010, 09952–05010,
09953–05010, 09953–05020, 09954–05020,
09954–05010)
HINT:
Either of 2 types of pulley may be used, each with its own
bolt size, type A(09954–05020) and type B
(09954–05010).
When re–using timing belt:
Remove the pulley without turning it.
14. REMOVE NO.1 TIMING BELT COVER
(a) Disconnect the crankshaft position sensor wire from the
clamp on the timing belt cover.
(b) Disconnect the clamp of the crankshaft position sensor
wire from the timing belt cover.
(c) Remove the 4 bolts and timing belt cover.
15. REMOVE TIMING BELT GUIDE
16. REMOVE TIMING BELT
HINT:
When re–using timing belt:
Draw a direction arrow on the timing belt (in the direction of en-
gine revolution), and place matchmarks on the timing belt and
crankshaft timing pulley.
17. REMOVE NO.1 IDLER PULLEY AND TENSION
SPRING
Remove the bolt, pulley and tension spring.
18. REMOVE NO.2 IDLER PULLEY
Remove the bolt and pulley.
Author : Date :
1192