Toyota Camry Manual page 2573

Ohmmeter
Ohmmeter
Air
G
Battery
SFI (5S–FE)
INSPECTION
1.
2.
(a)
Continuity
If there is no continuity, replace the VSV.
B01273
(b)
No Continuity
If there is continuity, replace the VSV.
B00798
(c)
E
B00799
Air
If operation is not as specified, replace the VSV.
3.
F
E
B00800
– VSV FOR VAPOR PRESSURE SENSOR
REMOVE VSV
INSPECT VSV
Inspect the VSV for open circuit.
Using an ohmmeter, check that there is continuity be-
tween the terminals.
Resistance: 33 – 39 Ω at 20°C (68°F)
Inspect the VSV for ground.
Using an ohmmeter, check that there is no continuity be-
tween each terminal and the body.
Inspect the VSV operation.
(1) Check that air flows from ports E to G.
(2) Apply battery positive voltage across the terminals.
(3) Check that air flows from ports E to F.
REINSTALL VSV
Author :
SF–47
SF0E4–04
Date :
1480