Toyota Camry Manual page 2410

Hide thumbs Also See for Camry:

Table of Contents

MANUAL TRANSAXLE (E153)

Install the oil baffle projection into the case side cutout.

DIFFERENTIAL CASE

Using SST and a press, install a new tapered roller bear-

ing outer race.

09316–60011 (09316–00011, 09316–00041)

Install the oil baffle.

Using SST and a hammer, drive in a new oil seal.

09223–15020, 09950–70010 (09951–07150)

Coat the lip of oil seal with MP grease.

Transaxle Case Side:

IF NECESSARY, REPLACE OIL SEAL AND TAPERED

ROLLER BEARING OUTER RACE

Remove the 4 bolts and 3 nuts.

Using a plastic hammer, tap the stud bolt and remove the

transaxle case cover.

Using a screwdriver and hammer, drive out the oil seal

from the transaxle case cover.

Using SST, a brass bar and hammer, remove the tapered

roller bearing outer race.

Show Quick Links

Table of Contents