Toyota Camry Manual page 1847

DI–820
INSPECTION PROCEDURE
1 Check voltage between terminal KSW of wireless door lock ECU connector and
body ground.
NG
Check and repair harness and connector between wireless door lock ECU and key unlock warn-
ing switch.
DIAGNOSTICS
KSW
N14694
– WIRELESS DOOR LOCK CONTROL SYSTEM
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
el brace.
CHECK:
Measure voltage between terminal KSW of wireless door lock
ECU connector and body ground, when key plate is not inserted
in the key cylinder.
OK:
Voltage: 10 – 14 V
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author : Date :
1055