INSPECTION PROCEDURE
1
Prepare for inspection. (See step 1 on page DI–787)
2
Does SRS warning light turn off?
Airbag Sensor Assembly
LOCK
AB0117
H01293
YES
Replace airbag sensor assembly.
DIAGNOSTICS
–
SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a)
Turn ignition switch to LOCK.
(b)
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Disconnect the airbag sensor assembly connector.
(d)
Connect negative (–) terminal cable to the battery.
CHECK:
Check operation of SRS warning light.
H01295
NO
Check SRS warning light circuit or terminal AB
circuit of DLC1.
Author :
Date :
DI–791
1026