Toyota Camry Manual page 2123

EM–10
DLC1
E1
TE1
DLC1
ENGINE MECHANICAL (1MZ–FE)
IGNITION TIMING
INSPECTION
1.
Allow the engine to warm up to normal operating temperature.
2.
TOYOTA
Hand–Held Tester
(a)
(b)
3.
Connect the tester probe of a timing light to the No.1 high–ten-
sion cord for No.4 cylinder.
S05358
4.
(a)
(b)
5.
(a)
SST
S04529
(b)
(c)
A06644
– IGNITION TIMING
WARM UP ENGINE
CONNECT TOYOTA HAND–HELD TESTER OR
OBDII SCAN TOOL
Connect a TOYOTA hand–held tester or OBDII scan tool
to the DLC3.
Please refer to the TOYOTA hand–held tester or OBDII
scan tool operator's manual for further details.
CONNECT TIMING LIGHT TO ENGINE
CHECK IDLE SPEED
Race the engine speed at 2,500 rpm for approx. 90 se-
conds.
Check the idle speed.
Idle speed: 700 ± 50 rpm
INSPECT IGNITION TIMING
Using SST, connect terminals TE1 and E1 of the DLC1.
SST 09843–18020
Using a timing light, check the ignition timing.
Ignition timing: 8 – 12° BTDC @ idle
(Transmission in neutral position)
Remove the SST from the DLC1.
SST 09843–18020
Author :
EM04L–03
Date :
1296