Toyota Camry Manual page 1838

INSPECTION PROCEDURE
1 Check DOME fuse.
OK
2 Check voltage between terminals +B and E of wireless door lock ECU connector.
LOCK
AB0117
N14690
NG
DIAGNOSTICS –
PREPARATION:
Remove DOME fuse from engine room junction block.
CHECK:
Check continuity of DOME fuse.
OK:
Below 1.0 Ω or continuity
N14677
NG
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
el brace.
CHECK:
E(–)
Measure voltage between terminals +B and GND of wireless
door lock ECU.
OK:
+B(+)
Voltage: 10 – 14 V
I00242
OK
WIRELESS DOOR LOCK CONTROL SYSTEM
Check for short in all the harness and compo-
nents connected to DOME fuse.
(See attached wiring diagram.)
Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author :
DI–811
Date :
1046