Toyota Camry Manual page 2357

MX–34
MANUAL TRANSAXLE (S51)
4.
(a)
(b)
(c)
(d)
(e)
NOTICE:
MT0792
Align the clutch hub grooves with the projections on the
synchronizer ring.
(f)
5.
SST
SM0201
6.
(a)
(b)
Z00431
7.
Using SST and a press, install the rear bearing.
SST
SM0202
– OUTPUT SHAFT
INSTALL SYNCHRONIZER RING, 2ND GEAR,
NEEDLE ROLLER BEARING AND 3RD DRIVEN GEAR
Install the ball.
Fit the 2nd gear bushing groove securely over the ball
when installing the 2nd gear bushing on the shaft.
Place the synchronizer rings on the 2nd gear.
Apply gear oil to the needle roller bearing and install it.
Install the 2nd gear.
Using SST and a press, install the 3rd driven gear.
SST 09316–60011 (09316–00011)
INSPECT 2ND GEAR THRUST CLEARANCE
(See page MX–28)
INSTALL OUTPUT GEAR SPACER, 4TH DRIVEN
GEAR AND RADIAL BALL BEARING
Install the outer gear spacer.
Using a press, install the 4th driven gear and bearing.
INSTALL REAR BEARING
SST 09612–22011
Author : Date :
1884