Toyota Camry Manual page 1753

DI–726
DTC B0118/46
CIRCUIT DESCRIPTION
The side squib circuit consists of the airbag sensor assembly and side airbag assembly (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0118/46 is recorded when a B+ short is detected in the side squib (LH) circuit.
DTC No.
D Short circuit in side squib (LH) wire harness (to B+)
D Side squib (LH) malfunction
B0118/46
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–704.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check side squib (LH) circuit.
ON
Squib (LH)
(–)
(+)
AB0119
H02277
H02119
OK
DIAGNOSTICS
Short in Side Squib (LH) Circuit (to B+)
(TMMK Made)
DTC Detecting Condition
CHECK:
(a) Turn ignition switch to ON.
(b) For the connector (on the side airbag assembly side) be-
tween the side airbag assembly (LH) and the airbag sen-
Airbag
sor assembly, measure the voltage between SFL+ and
Sensor
Assembly
body ground.
OK:
Voltage: 0 V
SFL+
H08266
NG
– SUPPLEMENTAL RESTRAINT SYSTEM
D Side airbag assembly (LH)
D Airbag sensor assembly
D Wire harness
D Sub wire harness
Go to step 5.
Author :
Trouble Area
Date :
DI4L7–01
961