Toyota Camry Manual page 1805

DI–778
7 Check airbag sensor assembly.
Front Airbag
Sensor (RH)
ACC ON
or
DLC1
DTC B1156/B1157/15
E1 Tc
H02757
AB0118 AB0119
R13006H01063
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
(c)
Assembly
(d)
CHECK:
(a)
(b)
(c)
(d)
(e)
H04014
OK:
HINT:
Codes other than code B1156/B1157/15 may be output at this
time, but they are not relevant to this check.
NG
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the front airbag sensor (RH) connector and air-
bag sensor assembly connector.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See Pub. No. RM572E1 on page DI–95)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See Pub. No. RM572E1 on page DI–95)
DTC B1156/B1157/15 is not output.
Replace airbag sensor assembly.
Author : Date :
1013