Toyota Camry Manual page 2394

Hide thumbs Also See for Camry:

Table of Contents

MANUAL TRANSAXLE (E153)

Using a feeler gauge, measure the clearance between the hub

sleeve and shift fork.

If the clearance exceeds the maximum, replace the shift fork or

MEASURE NO.2 SHIFT FORK AND HUB SLEEVE

Maximum clearance:

1.0 mm (0.039 in.)

INSPECT INPUT SHAFT

Check the input shaft for wear or damage.

Using a micrometer, measure the outer diameter of the in-

put shaft journal surface.

Minimum outer diameter:

Part A: 27.950 mm (1.1004 in.)

Part B and C: 35.950 mm (1.4154 in.)

Using a dial indicator, check the shaft runout.

Maximum runout:

0.05 mm (0.0020 in.)

Show Quick Links

Table of Contents