Toyota Camry Manual page 1764

DTC B0132/61
CIRCUIT DESCRIPTION
The P/T squib (RH) circuit consists of the airbag sensor assembly and seat belt pretensioner (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0132/61 is recorded when a ground short is detected in the P/T squib (RH) circuit.
DTC No.
D Short circuit in P/T squib (RH) wire harness (to ground)
D P/T squib (RH) malfunction
B0132/61
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–730.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check P/T squib (RH) circuit.
P/T Squib (RH)
(–)
H01019
H08392
OK
DIAGNOSTICS
Short in P/T Squib (RH) Circuit
(to Ground)
DTC Detecting Condition
Airbag
Sensor
Assembly
PR+
(+)
H08393
– SUPPLEMENTAL RESTRAINT SYSTEM
D Seat belt pretensioner (RH)
D Airbag sensor assembly
D Wire harness
CHECK:
For the connector (on the seat belt pretensioner side) between
the seat belt pretensioner (RH) and the airbag sensor assem-
bly, measure the resistance between PR+ and body ground.
OK:
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween seat belt pretensioner (RH) and airbag
sensor assembly.
Author :
DI–737
Trouble Area
Date :
DI1BH–10
972