Toyota Camry Manual page 2128

SST
SST
ENGINE MECHANICAL (1MZ–FE)
REMOVAL
1.
2.
3.
4.
Loosen the 2 bolts, and remove the drive belt.
5.
6.
7.
P18754
8.
(a)
(b)
P18816
9.
(a)
P18817
(b)
P18819
– TIMING BELT
REMOVE RH FRONT WHEEL
REMOVE RH FENDER APRON SEAL
REMOVE GENERATOR DRIVE BELT
(See page CH–6)
REMOVE PS PUMP DRIVE BELT
DISCONNECT ENGINE COOLANT RESERVOIR
HOSE FROM WATER OUTLET
DISCONNECT GROUND STRAP CONNECTORS
REMOVE RH ENGINE MOUNTING STAY, NO.2 RH
ENGINE MOUNTING STAY (M/T), ENGINE MOVING
CONTROL ROD AND NO.2 RH ENGINE MOUNTING
BRACKET (See page EM–71)
REMOVE NO.2 GENERATOR BRACKET
Loosen the generator pivot bolt.
Remove the nut and bracket.
REMOVE CRANKSHAFT PULLEY
Using SST, remove the pulley bolt.
SST 09213–54015 (91651–60855),
09330–00021
Using SST, remove the pulley.
SST 09950–50012 (09951–05010, 09952–05010,
09953–05010, 09953–05020, 09954–05020)
Author :
EM–15
EM04O–04
Date :
1301