Toyota Camry Manual page 1798

8 Is DTC B1141/33 out put again?
Side Airbag Sensor Assembly (LH)
ON
ACC
or
DLC1
E1
Tc
H01007
AB0119
AB0118
R13006 H01066
YES
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
Airbag
(b)
Sensor
(c)
Assembly
CHECK:
(a)
(b)
(c)
DTC B1141/33
(d)
(e)
OK:
H01170
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the side airbag sensor assem-
bly (LH).
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B1141/33 is not output.
NO Go to step 9.
Author :
DI–771
Date :
1006