Toyota Camry Manual page 2089

Installed spacer
No.
Measured
backlash
mm (in.)
Standard backlash (at punch mark A):
0.005 – 0.40 mm (0.0002 – 0.0016 in.)
EXAMPLE: The No.26 spacers are installed, and the measured backlash is
0.120 mm (0.0047 in.). Replace the No. 26 spacers with new No.11 spacers.
Adjusting Spacer Selection Chart (Off–Vehicle)
New spacer thickness
No. Thickness No. Thickness
01 1.84 (0.0724)
1.74 (0.0685) 11
1.76 (0.0693) 1.86 (0.0732)
03 13
1.78 (0.0701) 1.88 (0.0740)
15
05
07 1.80 (0.0709) 17 1.90 (0.0748)
09 1.82 (0.0717) 19
1.92 (0.0756)
mm (in.)
No. Thickness No. Thickness
2.04 (0.0803)
21 1.94 (0.0764) 31
1.96 (0.0772) 33 2.06 (0.0811)
23
1.98 (0.0780)
35 2.08 (0.0819)
25
27 2.00 (0.0787) 2.10 (0.0827)
37
2.02 (0.0975)
29 39 2.12 (0.0835)