Toyota Camry Manual page 2328

14 mm Head
Filler Plug
Drain Plug
MANUAL TRANSAXLE (S51)
10.
11.
12.
17 mm Head
NOTICE:
Q10002
Make sure that the vehicle is securely supported.
13.
14.
Oil Level
0 – 5 mm
15.
Q10003
16.
(a)
Q10010
(b)
(c)
(d)
(e)
Q10004
– MANUAL TRANSAXLE UNIT
REMOVE 4 TRANSAXLE UPPER SIDE MOUNTING
BOLTS
Torque:
17 mm head: 64 N·m (650 kgf·cm, 47 ft·lbf)
14 mm head: 46 N·m (470 kgf·cm, 34 ft·lbf)
REMOVE FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
RAISE VEHICLE
REMOVE ENGINE REAR SIDE SHUTTER PLATE AND
LH AND RH FENDER APRON SEALS
DRAIN TRANSAXLE OIL
Oil grade: API GL–4 or GL–5
Viscosity: SAE 75W–90
Capacity: 2.6 liters (2.7 US qts, 2.3 Imp. qts)
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
REMOVE LH AND RH DRIVE SHAFTS
(See page SA–16)
REMOVE FRONT EXHAUST PIPE
Remove the 2 bolts, nut and exhaust pipe bracket.
Torque:
Bolt: 19 N·m (195 kgf·cm, 14 ft·lbf)
Nut: 33 N·m (330 kgf·cm, 24 ft·lbf)
Remove the 3 nuts and gasket from the exhaust manifold.
Torque: 62 N·m (630 kgf·cm, 46 ft·lbf)
Remove the 2 bolts, nuts and gasket.
Torque: 56 N·m (570 kgf·cm, 41 ft·lbf)
Remove the 2 set bolts of the No.1 exhaust pipe support
bracket.
Torque: 33 N·m (330 kgf·cm, 24 ft·lbf)
Remove the front exhaust pipe.
Author :
MX–5
Date :
1855