Toyota Camry Manual page 2631

(e)
(c)
EGR Gas Temperature
Sensor Bracket
SFI (1MZ–FE) –
REMOVAL
1. DRAIN ENGINE COOLANT
2. DISCONNECT ACCELERATOR CABLE
3. A/T:
DISCONNECT THROTTLE CABLE
4. REMOVE AIR CLEANER HOSE
(a) Disconnect the PCV hose.
(b) Loosen the 2 hose clamps, and remove the air cleaner
hose.
S04506
5. REMOVE THROTTLE BODY
(a)
(a) Disconnect the throttle position sensor connector.
(b) Disconnect the IAC valve connector.
(c) Disconnect the water bypass hose (from the intake man-
ifold).
(b)
(d) Disconnect the water bypass hose (from the water inlet
housing).
(d)
(e) Disconnect the air assist hose.
S06123
(f) Remove the 2 bolts, 2 nuts, EGR gas temperature sensor
bracket, throttle body and gasket.
HINT:
At the time of installation, please refer to the following items.
Place a new gasket on the air intake chamber.
Torque: 19.5 N·m (200 kgf·cm, 14 ft·lbf)
S04527
THROTTLE BODY
Author :
SF–39
SF07V–03
Date :
1538