Toyota Camry Manual page 1721

DI–694
3 Check airbag sensor assembly.
Squib (RH)
ACC
SFR+
SFR–
DLC1
E1
Tc
H01020
AB0119
AB0118
R13006 H01068
OK
DIAGNOSTICS
Airbag
Sensor
Assembly
ON
or
DTC B0113/42
H01175
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect SFR+ and SFR– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (RH) and the airbag sensor assem-
bly.
(c) Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn ignition switch to ACC or ON and wait at least for 20
seconds.
(b) Clear DTC stored in memory.
(See step 5 on page DI–626)
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e) Check DTC.
(See page DI–626)
OK:
DTC B0113/42 is not output.
HINT:
Codes other than code B0113/42 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
Author : Date :
929