Toyota Camry Manual page 1786

INSPECTION PROCEDURE
1 Is DTC B1140/32 out put?
ACC
or
DLC1
E1
Tc
AB0118 AB0119
R13006 H09528
NO
2 Is connector of side airbag sensor assembly (RH) properly connected?
3 Prepare for inspection. (See step 1 on DI–787)
DIAGNOSTICS
ON
DTC B1140/32
H09527
– SUPPLEMENTAL RESTRAINT SYSTEM
CHECK:
(a) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(b) Clear DTC stored in memory.
(See page DI–626)
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e) Check DTC.
(See page DI–626)
HINT:
Codes other than code B1140/32 may be output at this time, but
they are not relevant to this check.
YES The malfunctioning part can now be considered
normal. To make sure of this, use the simulation
method to check.
Author :
DI–759
Date :
994