Toyota Camry Manual page 1845

DI–818
INSPECTION PROCEDURE
1 Check voltage between terminal L of wireless door lock ECU connector and
body ground.
NG
Check and repair harness and connector between wireless door lock ECU and door key lock and
unlock switch.
DIAGNOSTICS
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
L(+)
el brace.
CHECK:
Measure voltage between terminal L of wireless door lock ECU
connector and body ground.
OK:
N14693
– WIRELESS DOOR LOCK CONTROL SYSTEM
Voltage 10 – 14 V
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author : Date :
1053