Toyota Camry Manual page 1787

DI–760
4 Check wire harness.
Side Airbag Sensor
Assembly (RH)
SSR+
ESR
(–)
H01015
H01058 H01036
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
CHECK:
For the connector (on the airbag sensor assembly side) be-
tween the side airbag sensor assembly (RH) and the airbag
Airbag Sensor
sensor assembly, measure the resistance between SSR+ and
Assembly
ESR.
OK:
(+)
SSR+
ESR
H01160
– SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect the side airbag sensor assembly (RH) con-
nector.
Using a service wire, connect SSR+ and ESR of the con-
nector (on the side airbag sensor assembly side) between
the side airbag sensor assembly (RH) and airbag sensor
assembly.
Resistance: Below 1 Ω
NG Repair or replace harness or connector be-
tween side airbag sensor assembly (RH) and
airbag sensor assembly.
Author : Date :
995