SFI (1MZ–FE)
–
FUEL PRESSURE REGULATOR
REMOVAL
1.
REMOVE FUEL PUMP ASSEMBLY FROM FUEL TANK
(See page SF–12)
2.
REMOVE FUEL FILTER
(a)
Remove the screw, and pull out the fuel filter.
Torque: 2.0 N·m (20 kgf·cm, 17 in.·lbf)
(b)
Remove the O–ring from the fuel filter.
HINT:
At the time of installation, please refer to the following items.
Apply a light coat of gasoline to a new O–ring, and install it to
the fuel filter.
S04591
3.
REMOVE FUEL PRESSURE REGULATOR
(a)
Remove the screw, and pull out the pressure regulator.
Torque: 2.0 N·m (20 kgf·cm, 17 in.·lbf)
(b)
Remove the O–ring from the pressure regulator.
HINT:
At the time of installation, please refer to the following items.
Apply a light coat of gasoline to a new O–ring, and install it to
the pressure regulator.
S04590
Author :
Date :
SF–19
SF07G–03
1518