Toyota Camry Manual page 1815

DI–788
INSPECTION PROCEDURE
1 Prepare for inspection.
LOCK
P Squib
D Squib
Spiral
Cable
Front Airbag
Sensor (RH)
Front Airbag
Sensor (LH)
P/T Squib (LH)
Side Airbag
Sensor (LH)
Side Squib (LH)
P/T Squib (RH)
Side Airbag
Sensor (RH)
Side Squib (RH)
H06508
H01026
DIAGNOSTICS
PREPARATION:
(a)
Airbag Sensor
Assembly
(b)
(c)
(d)
(e)
(f)
(g)
(h)
CAUTION:
Store the steering wheel pad with the front surface facing
upward.
H06509
– SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Remove the steering wheel pad. (See page SR–11)
Disconnect the connector of the front passenger airbag
assembly. (See page RS–28)
Disconnect the connector of the side airbag assembly RH
and LH. (See page RS–40
Disconnect the connector of the seat belt pretensioner
RH and LH. (See page BO–126)
Disconnect the connectors of the airbag sensor assem-
bly.
(See page RS–59)
Disconnect the connector of the front airbag sensor LH
and RH. (See page RS–64)
Disconnect the connector of the side airbag sensor as-
sembly RH and LH. (See page RS–69)
Author :
and RS–52)
Date :
1023