Toyota Camry Manual page 1927

DI–900
3 Check voltage between terminal STP– of cruise control ECU connector and
body ground.
ON
(–) (+)
AB0119
I00142
NG
4 Check for open in harness and connectors between terminal STP– of cruise con-
trol ECU and stop light switch (See page IN–31).
OK
Check and replace cruise control ECU
(See page IN–31).
DIAGNOSTICS
STP–
I00173
– CRUISE CONTROL SYSTEM
PREPARATION:
(a) Remove the ECU with connectors still connected.
(b) Turn ignition switch ON.
CHECK:
Measure voltage between terminal STP– of cruise control ECU
connector and body ground, when the brake pedal is de-
pressed and released.
OK:
Depressed
Released
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–879).
NG Repair or replace harness or connector.
Author :
10 – 14 V
Below 1 V
Date :
1135