Toyota Camry Manual page 1813

DI–786
7 Check airbag sensor assembly.
Front Airbag
Sensor (LH)
ACC ON
or
DTC B1158/B1159/16
DLC1
E1 Tc
H01369
AB0119
AB0118
H01064
R13006
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
(c)
(d)
CHECK:
(a)
(b)
(c)
(d)
(e)
H01154
OK:
HINT:
Codes other than code B1158/B1159/16 may be output at this
time, but they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the front airbag sensor (LH) connector and air-
bag sensor assembly connector.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B1158/B1159/16 is not output.
NG Replace airbag sensor assembly.
Author : Date :
1021