Toyota Camry Manual page 2583

SST
Ohmmeter
SFI (5S–FE)
INSPECTION
1. REMOVE KNOCK SENSOR 1
(a) Disconnect the knock sensor connector.
(b) Using SST, remove the knock sensor.
SST
B06350
2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between
No Continuity
the terminal and body.
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR 1
(a) Using SST, install the knock sensor.
SST
Torque: 44 N·m (450 kgf·cm, 32 ft·lbf)
(b) Connect the knock sensor connector.
P01630
– KNOCK SENSOR
09816–30010
09816–30010
Author :
SF–57
SF0EE–03
Date :
1490