Toyota Camry Manual page 1716

DTC B0112/41
CIRCUIT DESCRIPTION
The side squib circuit consists of the airbag sensor assembly and side airbag assembly (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0112/41 is recorded when ground short is detected in the side squib (RH) circuit.
DTC No.
D Short circuit in side squib (RH) wire harness (to ground)
D Side squib (RH) malfunction
B0112/41
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–674.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check side squib (RH) circuit.
Squib (RH)
(–) (+)
H02272
H02118
OK
DIAGNOSTICS
Short in Side Squib (RH) Circuit
(to Ground) (TMMK Made)
DTC Detecting Condition
CHECK:
For the connector (on the side airbag assembly side) between
Airbag
the side airbag assembly (RH) and the airbag sensor assembly,
Sensor
measure the resistance between SFR+ and body ground.
Assembly
OK:
SFR+
H03251
– SUPPLEMENTAL RESTRAINT SYSTEM
D Side airbag assembly (RH)
D Airbag sensor assembly
D Wire harness
D Sub wire harness
Resistance: 1 MΩ or Higher
NG Go to step 5.
Author :
DI–689
Trouble Area
Date :
DI4L4–01
924