Toyota Camry Manual page 1945

DI–918
Actuator Control Cable
INSPECTION PROCEDURE
1 Actuator control cable inspection
OK:
(a) Check that the actuator and control cable throttle link are properly installed and that the cable and link
are connected correctly.
(b) Check that the actuator and bell crank operate smoothly.
(c) Check that the cable is not loose or too tight.
OK:
Freeplay: less than 10 mm
HINT:
D
If the control cable is very loose, the vehicle's loss of speed going uphill will be large.
D
If the control cable is too tight, the idle RPM will become high.
DIAGNOSTICS – CRUISE CONTROL SYSTEM
Author : Date :
DI092–07
1153