Toyota Camry Manual page 2589

SFI (5S–FE)
Ohmmeter
+B
HT
S05303
– HEATED OXYGEN SENSOR (Bank 1 Sensor 2)
INSPECTION
1. INSPECT HEATER RESISTANCE OF HEATED OXY-
GEN SENSOR
(a) Disconnect the oxygen sensor connector.
(b) Using an ohmmeter, measure the resistance between ter-
minals +B and HT.
Resistance: 11 – 16 Ω at 20°C (68°F)
If the resistance is not as specified, replace the sensor.
Torque: 44 N·m (450 kgf·cm, 32 ft·lbf)
(c) Reconnect the oxygen sensor connector.
2. INSPECT OPERATION OF HEATED OXYGEN SEN-
SOR (See page DI–75)
Author :
SF–63
SF0EK–03
Date :
1496