Toyota Camry Manual page 2381

MANUAL TRANSAXLE (E153)
(b)
SST
14.
15.
Using a torx socket wrench (T45), remove the 7 torx screws and
rear bearing retainer.
Z01308
16.
(a)
(b)
Q06190
17.
(a)
(b)
Q01615
18.
Q00056
– MANUAL TRANSAXLE ASSEMBLY
Using SST, remove the No.3 clutch hub with the synchro-
nizer ring and 5th gear.
SST 09950–30010
REMOVE NEEDLE ROLLER BEARING AND SPACER
REMOVE REAR BEARING RETAINER
Sealant:
Part No. 08833 – 00080, THREE BOND 1344, LOCTITE
242 or equivalent
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
REMOVE SNAP RING
Using a snap ring expander, remove the input shaft rear
bearing snap ring.
Using 2 screwdrivers and a hammer, remove the 2 snap
rings.
REMOVE STRAIGHT SCREW PLUG, SEAT, SPRING
AND LOCKING BALL
Using a hexagon wrench (6 mm), remove the plug.
Sealant:
Part No. 08833 – 00080, THREE BOND 1344, LOCTITE
242 or equivalent
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
Using a magnetic finger, remove the seat, spring and
locking ball.
REMOVE REVERSE IDLER GEAR SHAFT LOCK BOLT
Sealant:
Part No. 08833 – 00080, THREE BOND 1344, LOCTITE
242 or equivalent
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
Author :
MX–15
Date :
1816