Toyota Camry Manual page 2103

EM–104
SST
ENGINE MECHANICAL (5S–FE)
REPLACEMENT
1.
(a)
EM1321
(b)
(c)
Oil Hole
EM7329
(d)
P01038
(e)
2.
HINT:
EM1322
(a)
– CYLINDER BLOCK
REPLACE CONNECTING ROD BUSHINGS
Using SST and a press, press out the bushing.
SST 09222–30010
Align the oil holes of a new bushing and the connecting
rod.
Using SST and a press, press in the bushing.
SST 09222–30010
Using a pin hole grinder, hone the bushing to obtain the
standard specified clearance (See page EM–97) be-
tween the bushing and piston pin.
Check the piston pin fit at normal room temperature. Coat
the piston pin with engine oil, and push it into the connect-
ing rod with your thumb.
REPLACE OVERSIZED (O/S) PISTONS FOR CYLIN-
DER BORING
Bore all the 4 cylinders for the O/S piston outside diame-
ter.
Replace all the piston rings with ones to match the O/S
pistons.
Keep 4 new O/S pistons.
O/S 0.50 piston diameter:
87.350 – 87.380 mm (3.4390 – 3.4402 in.)
Author :
EM08K–03
Date :
1276