SF–28
California A/T
New Insulator
New
O–Ring
New Grommet
Except California A/T
New Insulator
New
O–Ring
New Grommet
California A/T
Turn
Connector
Except California A/T
Turn
Connector
Spacer
SFI (1MZ–FE)
INSTALLATION
1.
(a)
(b)
New
O–Ring
New
O–Ring
B00629
(c)
(d)
Push
(e)
Push
B00625
(f)
Spacer
S04510
–
INJECTOR
INSTALL INJECTORS AND DELIVERY PIPES
Install new insulator and grommet to each injector.
Apply a light coat of spindle oil or gasoline to 2 new O–
rings and install them to each injector.
Apply a light coat of spindle oil or gasoline on the place
where a delivery pipe touches an O–ring of the injector.
While turning the injector clockwise and counterclock-
wise, push it to the delivery pipes. Install the 6 injectors.
Position the injector connector outward.
Place the 4 spacers in position on the intake manifold.
Author :
SF07M–04
Date :
1527