Toyota Camry Manual page 1737

DI–710
3 Check airbag sensor assembly.
Squib (LH)
SFL– SFL+
DLC1
E1 Tc
H01017
AB0118 AB0119
R13006
H01074
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
(c)
CHECK:
ACC ON
(a)
or
(b)
DTC B0116/48
(c)
(d)
(e)
H01192
OK:
HINT:
Codes other than code B0116/48 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect SFL+ and SFL– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (LH) and the airbag sensor assem-
bly.
Connect negative (–) terminal cable to the battery, and
wait at least 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0116/48 is not output.
NG Replace airbag sensor assembly.
Author : Date :
945