Toyota Camry Manual page 2340

Hide thumbs Also See for Camry:

Table of Contents

MANUAL TRANSAXLE (S51)

MANUAL TRANSAXLE ASSEMBLY

INSPECT NO.5 SYNCHRONIZER RING

Check for wear or damage.

Check the braking effect of the synchronizer ring.

Turn the middle No.5 synchronizer ring in one direction while

pushing it to the outer No.5 synchronizer ring. Check that the

If the braking effect is insufficient, replace the synchronizer ring.

INSPECT NO.3 SHIFT FORK AND NO.3 HUB SLEEVE

Using a feeler gauge, measure the clearance between the hub

sleeve and shift fork.

Maximum clearance:

1.0 mm (0.039 in.)

If the clearance exceeds the maximum, replace the shift fork or

IF NECESSARY, REPLACE INPUT SHAFT FRONT

Remove the 2 bolts and transaxle case receiver.

Using SST, pull out the bearing.

Using SST, press in a new bearing.

Install the transaxle case receiver and torque the 2 bolts.

Torque: 7.4 N·m (75 kgf·cm, 65 in.·lbf)

IF NECESSARY, REPLACE OUTPUT SHAFT FRONT

Remove the bolt and bearing lock plate.

Using SST, pull out the bearing.

Show Quick Links

Table of Contents